General contractors, architects, property managers, and institutions use us as a skylight supplier, an installation subcontractor, or one point of responsibility for the whole scope. Commercial skylight work is our specialty, not our sideline.
Multi-unit ridge systems and long-span daylighting, engineered and installed. Recent: six-unit VELUX ridge system, Japanese Consulate, 4 E 67th St, boom truck, permits, and flagging handled. See our commercial skylight projects.
Per-unit labor pricing where curbs, hoisting, and scaffolding are by others. Clean scopes, licensed crews, and a sub who shows up knowing skylights.
Any unit we sell, quoted and delivered with spec support, sizing confirmed against your openings before it ships.
Architectural systems, walkable structural glass, commercial domes, and custom fabrication. Proposals carry full engineering specifications, dimensions, glazing makeup, finishes, weights, submittal-ready.
Commercial is a word that covers eight different jobs in this city. Here is what we are actually called out for, and what each one turns into once we are on the roof.
Institutional ridge and atrium runs. Multi unit ridge systems and long span daylighting over lobbies, stairwells and reading rooms. The six unit VELUX ridge at the Japanese Consulate on East 67th Street is the shape of this work: boom truck, permits and sidewalk flagging all carried by us rather than handed back to the general contractor. More of them are written up on our commercial skylight projects.
Old galvanized steel pyramids, hips and ridges. Still sitting on schools, factories, lofts and stair bulkheads all over New York. The frames rust from the inside out and the wire glass in them was never safety glass. The whole assembly comes off and a thermally broken aluminum pyramid or ridge goes back on a rebuilt curb. This one has its own page: wire glass and galvanized steel skylight replacement.
Labor only scopes for general contractors. Material, curbs, hoisting and scaffolding by others, per unit labor pricing, and a sub who turns up knowing skylights instead of learning on your job. Roofers and restoration contractors working the same way should start at the trade page.
Supply to your own crew. Any unit we sell, quoted and delivered with spec support, and sizing confirmed against your actual openings before anything ships. The most expensive mistake in this business is ordering the wrong size twice.
Co-op and condo common elements. If the skylight sits over a common element the job starts with the board, not the roof. Alteration agreement, certificate of insurance naming the building, the managing agent, and a schedule the super can live with. What we hand over is listed on skylights for co-op and condo boards.
Landmark and institutional approvals. Approval first, restoration matched profiles, and documentation an expeditor can file without sending it back. The rule most people get wrong is that a skylight is judged as a rooftop addition rather than a window, so the test is what can be seen from the street. The filing side is on NYC skylight permits and landmark rules.
Commercial domes. Chalked, cracked and crazed acrylic on warehouse and factory roofs. We quote the dome and we quote the glass alternative, and we always check whether the curb or the flashing is what actually failed before anybody prices a lid. The comparison is on acrylic dome skylights.
Failed glass in a frame worth keeping. Fogged, blown or cracked units in a commercial frame that is still sound. Whether the glass alone can come out depends on the frame and the data plate, which is the whole argument on skylight glass replacement.
Walkable and structural glass, engineered custom fabrication and architectural systems sit across all eight. If what you have is not on this list, send the drawing anyway. We bid general contractor and architect work every week.
You know how this usually goes. You send a drawing into a general inbox. Nothing comes back for a week. You chase. Somebody asks a question you already answered. The quote finally arrives with no lead time on it. Then the order goes in and you have no idea where it is until it shows up, or does not.
That is the normal experience of buying a commercial skylight in this city, and it is the thing we are actually competing on. Not catalogue depth. Anybody can order a unit. We want to be the easiest company in New York to buy a skylight from.
| Step | What happens, and what you can hold us to |
|---|---|
| 1. You send it | Roof plan, skylight schedule, a photo, or a size scribbled on a napkin. Use the form below, or email it. You do not need a complete package to start a conversation. |
| 2. We confirm we have it | Same business day, from a person, with their name on it. Not an autoresponder. If something is missing we tell you in that first reply instead of a week later. |
| 3. You get one point of contact | A name and a direct number. Not a quote desk, not a ticket, not a different person every time you call. |
| 4. The quote is complete | Line item per unit, what is included, what is by others, freight, and the lead time in writing. A quote without a lead time on it is not a quote, it is a number. |
| 5. Submittals when you need them | Cut sheets, dimensions, glazing makeup, finish and weights. Say the word and it comes as a package, not a chase. |
| 6. You know where the order is | We tell you when it ships and we tell you if it slips, before you ask. Nobody enjoys finding out on delivery day. |
| 7. Terms you can plan around | 1/3 down, 1/3 on delivery, 1/3 on completion. Written on every proposal. |
You have crews. We size it, quote it, get it, and deliver it. Sizing confirmed against your actual openings before anything ships, because the most expensive mistake in this business is ordering the wrong size twice.
Material, curbs, hoisting and scaffolding by others. Per unit labor pricing, a clean scope, and a sub who turns up knowing skylights instead of learning on your job.
One number, one contract, one company to call when it rains. No arguing later about whether it was the unit or the installation.
If the skylight sits over a common element, the job starts with the board and not the roof. We handle the alteration agreement, the certificate of insurance naming the building, the managing agent and the board, and a schedule the super can work with. See skylights for co-op and condo boards for what we hand the managing agent before anything is cut.
Attach the roof plan or the skylight schedule and we'll price it, supply only, labor only, or both. We bid GC and architect work every week.
You get a confirmation from a named person the same business day we receive your drawings or dimensions, so you are never wondering whether it landed. The quote itself carries a lead time in writing. A quote without a lead time on it is not a quote, it is a number.
Both. Supply only, labor only, or the whole thing under one responsibility. The third option is the one most owners want when something leaks, because there is nobody to point at but us.
Yes, as a package, without being chased for it. Specifications, product data and shop information go out together so your architect or engineer can review once instead of three times. Our skylight curb details and specifications are published, so your office can see the curb height, the slope and the flashing laps we hold before the submittal ever lands.
One third down, one third on delivery, one third on completion, stated on every proposal. Purchase orders, deposit and freight terms are on the quote rather than discovered later.
On a commercial job we handle the unit, the curb, the flashing and the tie back into the roof, plus the parts people forget: the boom truck or hoist, the sidewalk flagging, the filing and permits, the submittal package for the architect, and the certificate of insurance the building wants before anybody goes up. On a landmark or institutional building the approvals come first and the roof comes second.
Yes. Most of our commercial work is on buildings nobody empties out, so the opening gets closed and watertight the same day it is opened, and we schedule hoisting and street work around the hours the building can give us. Tell us the constraint when you send the drawings and it goes into the quote instead of surfacing on day one.
One point of contact with a direct number, and order status pushed to you rather than chased by you. That is the whole difference we are selling on the commercial side.
Yes. We are licensed and insured, LIC# 2084179, and certificates of insurance are issued naming the building owner and the general contractor as additional insureds where that is required. Limits are confirmed on request in writing.
Not usually, but it changes the order of operations, so we ask who holds the warranty before anything is cut. Opening a roof under an active manufacturer warranty can void it. Coordinating with the warranty holder first is cheaper than arguing about it afterward.